How to install SSD on your desktop; A Complete Guide

Aamir Khan

SSD is used in modern computer systems for higher speed and performance. You already know what SSD is. If you know SSD, you should also know how to install SSD on your desktop or system.

If you want a high-performance PC that works smoothly, you should need SSD as your primary storage or in which your OS will be installed. The problem is if you have already installed OS on your system and recently decided to upgrade your PC by installing an SSD. And you also don’t want to reinstall OS and enjoy the same setting and everything to be the same. If you are on Windows 11, you can transfer your whole OS, as in this article.

You can use the given software to transfer your OS to the SSD.

  • EaseUS Partition Master Free.
  • Macrium Reflect 8 Free.
  • DiskGenius (Free Edition)
  • MiniTool Partition Wizard Free.
  • AOMEI Backupper Professional.
  • AOMEI Partition Assistant Standard.
  • DriveImage XML.
  • Clonezilla Live CD.

Install SSD for PC Performance

As we have heard, there are two types of storage drives, HDD and SDD. HDD(Hard Disk Drive) is a traditional storage drive that provides a tremendous amount of storage space, and it is useful where the amount of data is enormous, but with all of this, it offers less speed and performance and works too slowly. And can’t handle large files. And also uses more energy than SSD(SSD vs HDD). On the other hand, SSD(Solid State Drive) provides more speed, almost 10x faster than a high-quality HDD. SSD is noiseless as there are no physically moving objects. Therefore it produces no noise and also consumes low energy.

The use of SSD is continuously increasing due to its many advantages like speed, performance, low energy consumption, and many more hidden benefits (Everything about SSD).

Installing an SSD can speed up booting and program loading times and improve overall PC responsiveness. You can either replace the HDD with an SSD or use both, setting the SSD as the primary drive and the HDD as a storage disk.

This guide will show you how to install SSD on your desktop or laptop.

Necessary Precautions to Take Before Proceeding

Before we start, we should know well about SSD and ensure which type of SSD is best for our PC or Laptop. Choosing an excellent solid-state drive is essential.

And here two related articles are for you to choose from:

Note:

Confirming the supported SSD interface with your PC manufacturer before buying a new SSD is advisable.

Once you connect the SSD to your computer, access Disk Management by right-clicking on This PC or My Computer, selecting Manage, and initializing the disk to MBR if your computer is old. Then, follow these steps to install the SSD on your PC.

Transfer Data and OS to New SSD

Indeed, you will not want to reinstall the OS on your PC or laptop, so here is a complete guide to transferring your data and OS to the new SSD. By following this guide, you can clone your whole system, and the data you select will be moved to your new SSD with the same apps running in the same fashion as your old drive. And also with the same setting as in your old industry with the OS in the previous storage drive. So carefully follow the guide to transfer your data and OS.

How to Install SSD on a PC

Installing an SSD can be a complex process that requires careful attention to instructions. This guide will provide step-by-step instructions for installing an SSD on a laptop and desktop.

Tip:

 The steps concern a SATA SSD and an M.2 SSD installation.

How to Install an SSD Laptop

For a SATA SSD

  • First, unplug the power cable, then use a screwdriver to unscrew the back screws of your laptop and remove the bottom cover of the computer.
  • Remove the battery of your laptop.
  • Locate the storage slot and remove the original HDD.
install SSD
  • Fasten the SSD to the bracket, and if there are any attachments on the old disk, detach them and attach them to the SSD in the same manner.

Tip:

The disk bracket is designed to safeguard the disk from vibration and is typically used for 2.5-inch hard drives. However, some laptops may not have a disk bracket.

  • Fasten the bracket, put the new SSD to the laptop via SATA connection, and put the battery back in.
  • Remount the laptop’s bottom panel and screw the fasteners.

For an M.2 SSD

Step 1: Also, open the bottom panel of the laptop.

Step 2: Inside the M.2 SSD to the M.2 slot on the motherboard. Note that the side with product information and labels should be up.

Step 3: Use the screwdriver to screw in place the SSD.

Step 4: Make sure everything is in place and screw the laptop’s cover back in.

After following these steps, installing an SSD on your laptop is simple. If you are using a desktop, now let’s see how to install SSD on a desktop.

install SSD

How to Install SSD on a Desktop

Install a SATA SSD

  • Please disconnect the power, remove all cables, and put it in a cool and dry place.
  • After taking off its case, you can see where it is installed.
  • Connect your SSD to the motherboard using a SATA cable, and then use the SATA power cable to link the SSD to the PSU.
  • Put the SSD on the mounting tray and slide the tray into the case.
install SSD
  • Remount the desktop case.

Install an M.2 SSD

  •  Also, open the computer case.
  • Choose the M.2 slot you want to use and place the M.2 SSD on the motherboard.
  • Tighten the screw down and put the case back.

How to Boot Your PC from the Newly Installed SSD

After installing the SSD in your system, this is the last step to specify the boot order and tell your computer to boot from this newly installed SSD.

Note:

For a PC with only one hard drive, this is not necessary. But you need to do this work if you keep two hard drives.

So if you use more than one drive, you should tell your computer to boot from the newly installed SSD. For that, start your computer and enter the BIOS menu; press keys according to your brand for DELL; it is F2, F10, F12, etc. 

Here you will find an option saying Boot options. In your case, it may be at different locations, and it depends on which company of PC you are using. Next, change the first boot sequence to the SSD, save the change, and your computer will run from the SSD quickly. Now, the machine will be significantly snappier without reinstalling the OS.

Leave a Comment